How Do You Fix A Garage Door That Keeps Stopping?

How Do You Fix A Garage Door That Keeps Stopping?

Are you fed up with your garage door constantly stopping halfway through? It’s a common problem, but don’t worry – it can be fixed. In this article we’ll show you how to identify and fix the issue so that your garage door works smoothly again in no time.

When something goes wrong with your garage door opener, it can be frustrating. You might find yourself stuck outside while trying to get into the house or unable to leave because of an unresponsive door. If you’re experiencing these problems, then read on for tips on how to solve them.

By following our simple guide, you’ll soon be able to repair any issues that are preventing your garage door from working as it should. So let’s get started – whether you want to open or close the door, follow our advice and you’ll soon have control over your garage once more!

Diagnosing The Problem

For a garage door that stops during operation, there are several potential causes. First, the springs could be worn out and need to be replaced. Secondly, the track may have become misaligned or blocked with debris – both of which can cause it to stop prematurely. Thirdly, the opener motor might not have enough power or torque to open the door all the way up. Lastly, it’s possible that something is wrong with one of the safety sensors preventing it from closing fully.

In order to diagnose what’s causing your garage door to keep stopping, you’ll want to start by inspecting all these elements individually. Begin by looking at the springs; if they’re cracked or frayed then you know they’ve reached their lifespan and will need replacing before anything else. Next check that the tracks are properly aligned and free of any obstructions like leaves or dirt particles – if they aren’t then realigning them should do the trick. After this move on to checking for adequate power in the opener motor and make sure nothing is blocking its path when moving through its cycle. Finally inspect each of the safety sensors for proper alignment and functionality- if either one becomes disconnected then it won’t close completely no matter how hard you try otherwise!

Once you’ve gone through all these steps, you should now have an idea as to why your garage door keeps stopping mid-operation. If none of those issues seem applicable then you may want to call a professional technician who can provide further assistance in diagnosing and resolving whatever issue is plaguing your system – hopefully saving time, money and headaches along the way!

The key takeaway here is that understanding what needs fixing first is essential when trying to solve any kind of problem related to garage doors. Taking some time upfront in doing research into different components can go a long way towards helping identify exactly where things went wrong so repairs can be made quickly and effectively without having costly outside help come in too soon!

Common Causes Of A Garage Door Stopping

When a garage door keeps stopping, it can be extremely frustrating. It’s important to diagnose the problem before attempting any repairs. Common causes of a garage door stopping include worn parts, loose hardware, and obstruction in the tracks.

The most frequent cause for a malfunctioning garage door is worn components like springs or cables that need replacing. Worn-out parts may also lead to other issues such as misaligned tracks or uneven tension on one side. If you find yourself dealing with this issue, try lubricating all moving parts first; if there’s still no improvement, then consider changing out those worn components.

Loose hardware is another common culprit behind an erratic garage door performance. Nuts and bolts become loosened over time due to vibrations caused by opening and closing. To prevent further damage, check your owner’s manual to double-check which nuts and bolts are used in the system and tighten them accordingly.

Lastly, debris and small objects getting stuck in the track can also cause your garage door behave erratically. This usually happens when something is blocking one of the rollers from moving freely along its path–the result being that the entire system has difficulty functioning properly until those obstructions are cleared away. So if you come across anything lodged inside the tracks while inspecting it, make sure to remove it so that everything works smoothly again!

Repairing The Door Track

Repairing the door track is a common solution when dealing with garage doors that keep stopping. It’s important to inspect the tracks and rollers to see if any of them are bent, rusted or broken. If any of these problems are present, they should be fixed right away as they can cause issues with the opening and closing of your garage door.

Another step in the repair process involves lubricating all moving parts on the door, including hinges, bearings and springs. This will ensure smooth movement throughout its operation. Doing this regularly will also help prevent further damage from occurring due to wear and tear over time.

If there’s still an issue after trying these solutions, it may be necessary to replace some parts completely such as worn out cables or damaged panels. You should always consult a professional for more complicated repairs like this one as incorrect installation could make things worse than before!

It’s essential that you follow safety protocols while carrying out maintenance work on your garage door – so use caution when performing tasks such as adjusting tension springs or replacing entire components!

TIP: Make sure that you check both sides of your garage door for signs of wear or damage – even small changes can have big consequences!

Replacing The Garage Door Rollers

Replacing the garage door rollers is a great way to fix a malfunctioning door. If your door keeps stopping or failing to open and close properly, this may be the issue at hand. Let’s look at what it takes to get those rollers replaced.

First and foremost, you’ll need new rollers that are compatible with your model of garage door. You can find these from any hardware store – just make sure they fit before purchasing them! Here are four steps for replacing the rollers:

1) Make sure all power sources connected to the opener are turned off so no one gets hurt during repairs.

2) Remove the old roller brackets by unscrewing each bracket and unclipping them from their respective tracks.

3) Install the new roller brackets onto both sides of the track and secure in place, making sure to align everything correctly.

4) Place new rollers into each bracket, ensuring they’re screwed in tight, then reattach the cables back onto their pulleys so they don’t fall out while opening/closing your door.

It’s important that you take time to ensure everything is aligned correctly as small misalignments could result in further problems down the road. Additionally, if you have an older style of garage door with extra springs or tension rods involved you might want to consider getting help from a professional before attempting anything yourself. Replacing your own rollers can save time and money compared to hiring someone else – plus it’s empowering when done right! So go ahead and give it a try!

Troubleshooting The Garage Door Opener

Troubleshooting the garage door opener is a great place to start when trying to fix an issue with your garage door. It may be that there is something wrong with the opening mechanism itself and not with the rollers as previously suspected. Checking for any loose connections, worn parts, or blinking lights can help you diagnose the problem quickly.

If everything looks okay but the door still won’t open, it’s possible that resetting the remote might do the trick. To do this, you’ll need to find the small button on both ends of the motor unit which will allow you to reset it and get it working again.

Sometimes issues arise due to incorrect programming in either the motor unit or wall switch – double checking these settings should clear up any errors here as well. If all else fails, replacing batteries in both units could also solve your problem.

In short, troubleshooting your garage door opener can save time and money by helping pinpoint potential causes of mechanical failure before further damage occurs – making sure that your garage door remains safe and secure at all times!

How To Lubricate The Garage Door

Lubricating the garage door is an important part of keeping it in good working order. If your opener keeps stopping, you may need to check and lubricate its components. This task isn’t difficult, but it’s important to do correctly so that your opener continues to work properly.

First, you’ll want to locate the moving parts of the garage door which require lubrication. These include any hinges, rollers, and tracks along which the door moves when opened or closed. In some cases, these can be tricky to spot without taking apart the entire system – if this is necessary for you, seek professional help from a garage door repair technician.

Once all of these are located, use a special lubricant designed specifically for metal surfaces such as WD-40 or lithium grease. Apply a light coating directly onto each component using either a brush or spray application depending on what type of product you’re using. Make sure not to overspray inside the openers themselves; this could cause damage or reduce their effectiveness over time.

Finally, test out your newly lubricated garage door by opening and closing it several times to make sure everything works smoothly again! With regular maintenance like this, your opener should last many years with no problems.

Replacing The Garage Door Springs

Replacing the garage door springs is a great solution for fixing a malfunctioning garage door. It can be an effective and relatively quick repair, compared to other options like replacing cables or tracks. Here are 4 steps you should follow when replacing your garage door springs (not recommended without the help of a professional garage door technician):

1) Gather the necessary tools and safety equipment. Make sure you have protective goggles, gloves, as well as wrenches and pliers.

2) Unwind the old spring according to manufacturer instructions while keeping tension on it with your hands at all times—this can help prevent dangerous recoil of the spring if not done correctly.

3) Remove any excess tension in the system by adjusting the cable drums or pulling out some slack from them.

4) Install new torsion springs, winding up each one until there’s enough tension in it to keep it securely in place.

Once these steps are complete, test your newly installed springs by opening and closing the garage door several times. This will ensure that they are operating properly without causing any issues down the line. If everything appears to be working smoothly, then you’re good to go!

Replacing The Garage Door Cables

Replacing the garage door cables can be a great way to solve the problem of a garage door that keeps stopping. It’s important for homeowners to understand what might cause this issue and ensure they have the right tools on hand before attempting any repairs.

When it comes to fixing a malfunctioning garage door, replacing the garage door cables is one step in the process. The cables are responsible for connecting your opener to the heavy-duty springs, which help lift and lower the door as needed. If these components become worn or loose over time, it could affect how smoothly your garage door operates.

It’s essential to take extra caution when trying to replace the cable yourself. Make sure you disconnect all power sources from your garage door before beginning any type of repair work. Additionally, always use safety glasses while working with high tension springs, as they can snap back suddenly if not handled properly.

To complete this project successfully, you’ll need two adjustable wrenches, along with several zip ties and some lubricant spray for maintenance purposes afterward. With careful attention given to each step in the instructions provided by your manufacturer, you should be able to get your garage door running again in no time!

Adjusting The Garage Door Sensors

Adjusting the garage door sensors can be a great way to fix a problem with your garage door that keeps stopping. The first step is to identify where the sensors are located and ensure they are connected properly. Then, one must check if any debris or dirt has accumulated on them, as this could cause interference. Clearing away anything near the sensors should do the trick.

Next, it’s vital to adjust the sensitivity of the sensors so that they don’t detect movement when there isn’t any. This will prevent your garage from opening and closing unexpectedly due to external factors like wind or animals passing by. It’s also important to make sure both sensors have been adjusted in unison; otherwise, this could lead to further problems with your garage door functioning correctly.

Finally, you’ll want to take some time to test out your adjustments after changing settings on your sensor(s). Check for proper alignment between the two units by running several tests until everything seems okay. If all these steps have been followed correctly, then adjusting the garage door sensors should help get rid of that pesky issue with your garage door constantly stopping while in use!

Replacing The Garage Door Keypad

Replacing the garage door keypad is an effective way to fix a garage door that keeps stopping. This method requires some simple tools and should take no more than 30 minutes. The first step is to identify the make and model of your garage door opener, as this will help you determine which type of keypad you need to purchase. Next, disconnect the power supply from your garage door opener so it can’t be accidentally activated while you’re working on it.

Once the power is disconnected, unscrew any screws or bolts holding the existing keypad in place and carefully remove it. When selecting your new replacement keypad, keep in mind that there are several types available depending on the features required for your particular system. After purchasing the right one, attach its wiring harnesses according to their labels and then mount the keypad into its original position with mounting brackets if necessary.

Finally, once everything is secure, reconnect the power supply and test out your new keypad. If all goes well then you have successfully replaced your old faulty keypad! With regular maintenance checks like replacing worn out parts such as sensors or other components when needed, you’ll save yourself time and money in terms of repairs down the line.

Repairing The Garage Door Weather Stripping

Repairing the garage door weather stripping is an important step to fixing a malfunctioning garage door. It’s possible that, over time, the weather stripping has deteriorated and can no longer provide effective insulation. Here are some things you can do to ensure your weather stripping continues functioning properly:

  • Inspect the existing strip for damage or wear and tear – if it looks worn out, replace it with a new one.
  • Clean any dirt or debris from the track where the weather stripping will be installed so that it fits snugly against the wall of your garage.
  • Measure twice before cutting your replacement material according to size specifications given by your manufacturer.
  • Test fit the new weatherstripping before applying adhesive to secure it in place.
  • Once securely adhered, check to make sure everything works as intended – doors should open and close smoothly without stopping prematurely.

By replacing old or damaged weather strips on your garage door, you’ll be able to reduce energy loss while making sure the door operates correctly again. This process requires minimal tools but may take some time depending on how much effort needs to go into cleaning up and installing new materials. With patience and careful attention paid during each step of repair, you can have confidence knowing your repairs will last for years ahead. And with a fully operational garage door once more, you’ll never have to worry about unnecessary stops ever again!

Replacing The Garage Door Hinges

Replacing the garage door hinges is a key element of fixing a garage door that keeps stopping. If the problem isn’t with the weather stripping, it could be because the hinges have come loose or worn out from old age. It’s relatively easy to replace these hinges yourself—all you need are some basic tools and an understanding of how your particular type of garage door works.

First, you’ll want to make sure you acquire replacement parts that match your existing ones. Then, remove all the bolts connecting each hinge. Typically there will be either three or four of them per hinge. Afterward, take off the top section of the garage door by unscrewing any screws holding it in place – as well as its metal tracks if they’re present. Now, install the new hinges into their respective places and reattach the top part again using screws and nails where necessary.

Finally, close up any gaps between the sections of your garage door before replacing the bolts back onto each hinge and tightening them securely. Make sure to double-check that everything has been done correctly so that no further issues arise down the line!

With this simple repair job complete, your garage door should now work properly without constantly stalling or getting stuck.

Benefits Of Professional Garage Door Services

When it comes to garage door repair, there are many benefits of hiring a professional. Making sure the job is done right can save time and money in the long run. Here we will discuss some of these advantages.

First off, professionals have the experience and knowledge needed for complex repairs that may arise with garage doors. This includes issues such as broken springs or cables, misaligned tracks, damaged panels or sensors not working properly. With their expertise, they know how to identify the problem quickly and take action immediately.

Another benefit is safety. Working on a garage door requires special tools and skills which only professionals possess. If you attempt DIY repairs without proper training, you risk injuring yourself or further damaging your property. Professionals also come equipped with all necessary parts and materials so that any problems won’t be overlooked due to lack of supplies.

Finally, having a professional service complete your garage door repair will guarantee quality workmanship and peace of mind knowing that if something goes wrong after the job is finished then they are liable for fixing it at no additional cost to you. When it comes down to it, investing in reliable help now could save you from costly headaches later on down the line.

Finding Quality Garage Door Services Near You

Having a garage door that keeps stopping can be an annoying problem, and it’s important to find quality help to fix the issue. But before you jump into finding services for your garage door repair, it’s important to consider all of the benefits of using a professional service in the first place.

A quality professional garage door service will have experienced technicians with training on how to safely diagnose and repair any issues with your system. They’ll also come fully equipped with specialized tools and replacement parts so they can complete repairs quickly while ensuring long-term reliability. Here are some other key advantages of working with professionals:

  • Significant cost savings by avoiding expensive DIY mistakes or damage
  • Specialized knowledge to replace worn out parts correctly
  • Access to superior customer support if anything goes wrong
  • Peace of mind knowing you’re getting excellent workmanship

Finding quality professional services for garage door repairs doesn’t need to be difficult either. With many companies offering 24/7 emergency assistance, you can get prompt attention when you need it most. Taking time to research local providers who specialize in residential overhead doors is essential as well – this way you know they understand the unique needs of homeowners like yourself and can provide personalized advice on any repair or maintenance concerns.

Of course, no one wants unexpected surprises when paying for services. That’s why shopping around and requesting free estimates from multiple contractors is always recommended. This way you can compare prices in order to make sure you’re getting the best deal possible without sacrificing quality workmanship or customer care.

Tips For Choosing The Right Garage Door Repair Company

Choosing the right garage door repair company doesn’t have to be a hassle. With some preparation, it can be a smooth process. First, consider your budget and how much you’re willing to spend on repairs. Having an idea of what kind of service you need is also important; if possible, contact different companies for quotes so that you can compare prices and services offered before making a decision.

Next, look at reviews online to see what other customers are saying about their experiences with certain companies. You should also check out any certifications or licenses they may have; this will give you peace-of-mind knowing that your garage door will be repaired properly by professionals who know what they’re doing. Additionally, ask friends or family members for referrals; sometimes word-of-mouth goes a long way in finding reliable workmanship.

When searching for a good repair company, make sure that the team offers warranties on parts and labor as well as servicing all major brands—this ensures that any issues related to faulty products and/or improper installation will be taken care of without additional cost down the road. Moreover, being able to get same-day service is always helpful when dealing with urgent problems like broken springs or misaligned tracks which require immediate attention.

Having done your due diligence during the research phase allows you to select the best option available and rest assured it’ll provide quality results. All these steps help ensure that fixing your garage door won’t leave you feeling frustrated or overwhelmed—instead, it’ll result in improved security and convenience around your home while keeping costs low!

Frequently Asked Questions

Fixing a garage door that keeps stopping can be an expensive and time-consuming task. This is why it’s important to first understand what the issue may be before taking any action. In order to do this, you’ll need to inspect the door for any visible signs of damage or malfunction. If there are no obvious problems, then you’ll have to look deeper into the mechanics of the door itself.

Once you’ve identified the cause of the issue, it’s time to start considering how much it might cost to fix your garage door. Depending on the severity of the problem, you could be looking at anything from minor repairs all the way up to replacing entire parts of the system. It’s also worth bearing in mind that professional repair services can come with added costs too.

When calculating your potential costs, make sure not to overlook any additional expenses such as tools and materials needed for completing repairs yourself or hiring someone else to do them for you. The best thing you can do is get quotes from different contractors and compare prices before making a decision about who will carry out the work for you.

No matter which option you choose, always ensure that whoever is doing the job has experience working with garage doors so they can provide quality results without putting safety at risk – after all, DIY fixes don’t usually end well!

Maintaining a garage door can be a tricky task, especially when it keeps stopping. One of the most important maintenance tasks for keeping your garage door in proper working order is lubrication. This helps to reduce friction and prevent wear on components like springs, tracks, pulleys, and hinges.

So how often should you lubricate your garage door? The answer depends on several factors such as climate conditions, frequency of use, and parts used. In general, however, it’s best to oil all moving parts with a light machine oil every six months or so. You may need to do this more frequently if your area has extreme weather conditions or if you open and close the door multiple times per day.

When you’re ready to apply the oil, make sure to check the manufacturer’s instructions first. Some manufacturers recommend specific types of oils for their products while others specify certain areas that require lubrication more often than others. Additionally, consider using an aerosol spray instead of liquid oil as these are less likely to create messes and attract dirt particles which could cause further damage down the line.

To ensure optimal performance from your garage door over time, take some time periodically for basic maintenance including regular lubrications – it’ll help keep everything running smoothly!

It is important to take safety precautions when repairing any type of garage door. One should always make sure that the power source is off and unplugged before attempting to repair it, as well as ensure there are no items in the path of the moving parts. It’s also smart to wear protective gear such as gloves, eye protection and a hard hat for extra precaution.

In addition to these basic safety rules, one should check for any loose hardware or components that may be hindering its movement. This could include nuts and bolts, hinges, springs or cables that have come undone over time. If these have been found to be loose then they will need to be tightened up again before proceeding with repairs.

If all else fails, you might consider replacing certain parts on your own if possible; however this should only be attempted by someone who has experience in doing so. Make sure you understand how each part works together before attempting any repairs yourself- otherwise you risk further damaging the system.

To sum up, it is essential to follow some key safety tips whenever performing maintenance or repairs on a garage door – from unplugging the power source and wearing protective gear to checking for loose parts and understanding how different components work together. Taking these simple steps can help keep everyone safe while ensuring successful repairs are made.


When it comes to repairing a garage door, safety is key. Many aspects of the repair process involve working with complex systems that require special care and attention. One such system are the sensors located in and around the garage door itself. It’s important to ask whether it’s safe for you to adjust these sensors yourself or if it would be best to leave this task up to an experienced professional.

If you’re considering adjusting your own garage door sensors, there are certain precautions you should take first. Firstly, make sure all power sources leading into the sensor have been turned off – this will ensure no electric shocks happen during repairs. Secondly, use caution when handling any part of the mechanism as they may be delicate and easily damaged. Lastly, never attempt to adjust anything unless you know what you’re doing; trying to do something without having proper knowledge can cause more damage than good.

Knowing how tricky it can be to properly diagnose and fix a problem like a malfunctioning garage door sensor, many homeowners decide it’s better left to experts in the field who have experience dealing with these types of issues on a regular basis. Professional technicians come equipped with the tools necessary for making careful adjustments while minimizing risk, so hiring one could save time and money in the long run.

Fortunately, finding someone qualified isn’t difficult due to the abundance of service providers now available online and through local directories. Before committing to anyone though, always research reviews or get recommendations from people who’ve used them before – this way you’ll know exactly what kind of experience others had with their services.


garage door safely and effectively without breaking the bank!

Adjusting the sensors on a garage door is not recommended unless you are experienced in this type of repair. When it comes to replacing garage door springs, however, there are some signs that may indicate they need to be replaced.

The first sign is if your garage door has become slower or its speed has changed significantly when opening and closing. This could mean the springs have been stretched out from use over time, which can cause instability and problems with operation. Additionally, if you hear loud noises coming from the springs when operating the door, this could also indicate that they should be replaced as soon as possible for safety reasons.

Finally, take note of any visible damage to the springs themselves. If your garage door’s spring appears bent or broken in any way then it will most likely need to be replaced immediately. It’s important to understand that trying to repair a damaged spring yourself can result in serious injury due to their tension so make sure to seek professional help if you notice any issues with them.

In order to ensure your garage door operates safely and correctly, keep an eye out for these signs that replacement of the springs might be needed – slow speeds when opening/closing, loud noises during operation and visible damage on the springs themselves. Doing so will help prevent potential hazards caused by malfunctioning parts and guarantee smooth performance for years to come.

for assistance. With the proper knowledge and guidance, anyone should be able to take care of their



To conclude, fixing a garage door that keeps stopping is not an easy task. It requires careful attention and the right tools to ensure safe and efficient repair. The cost of repairs can vary depending on what needs to be done, but it’s important to make sure you don’t forget any safety precautions while doing so. Lubricating the door regularly will help keep it functioning properly and prevent further issues from occurring down the line. Finally, understanding when your springs need replacing or if they’re just too worn out is vital in order to avoid more costly problems later on. All in all, taking care of these simple maintenance tasks can go a long way towards keeping your garage door working like new for years to come.

I hope this article has helped shed some light on how to fix a garage door that keeps stopping. Fixing small issues with regular maintenance now can save you time and money in the long run! If you have any questions or concerns about repairing your own garage door, don’t hesitate to contact a professional for assistance. With the proper knowledge and guidance, anyone should be able to take care of their garage door safely and effectively without breaking the bank!

Twins Garage Doors Men

Want Your Garage Door Repair or Installation? We’re Ready To Start!

Get Special Offer Today

Recent Post


Spring Orange